, , ,

Sink tables and worktables


Sink table and worktable tops are manufactured of both stainless and acid-proof steel according to their intended use. Resistant to heavy wear and easy to clean, our hygienic tops have been specifically designed for professional use. Efforts have been made in all structures to eliminate sharp and cutting edges and to make the surfaces easy to clean. On request we also provide tabletops of other materials such as stone, laminate and composite.

Our stainless steel tables are tailored based on the customer’s wishes, making it possible to specify table accessories that are suitable for the intended purpose. The frame is made of 30×30 mm stainless steel tubes and the legs are equipped with adjustable feet. The table tops can be fitted with a raised edge profile or with a splash guard. A moisture-resistant chipboard or galvanized steel sheet is glued as a support plate under the table top.

The substructures are fitted with cabinets, drawers and shelves based on the intended use.

Washbasins, also available in made-to-order dimensions, can be fitted in the tabletops separately, in pairs or as a basin series.

Product data sheet

Sink tables 5030/P

Sink tables can be fitted with standard-size sinks or sinks with made-to-order dimensions. Where required, the sinks will be provided with overflow holes and drain valves.

The frame can be fitted with suitable shelves, cabinets, waste trolley cabinets and drawers selected from our range. The cabinets and drawers can also be equipped with drawer locks.

Combining different frame units makes it possible to create a table that suits the intended use exactly.

Worktables 5030/T

The worktable can be fitted with suitable shelves, runners, cabinets, waste trolley cabinets and drawers selected from our range. The cabinets and drawers can also be equipped with drawer locks.

Combining different frame units makes it possible to create a table that suits the intended use exactly.

Techical information

Stainless steel AISI 304
Acid-proof steel AISI 316

Frame structure
Galvanised steel plate (standard in sink and work tables)
Stainless steel plate
Damp resistant chipboard (standard sink and table tops)

Base structure
Tubular frame 30×30 mm or 40×40 mm

Standard lengths
600-4600 mm

Standard depths
600-700 mm
650 (750) mm with manual height adjustment 200 (300) mm respectively

Standard heights
700-900 mm

Height-adjustable tables
Height adjustment range 300 mm or 200 mm

Accessories included
Sink tables: edge profile, a base valve and a rubber plug
In height-adjustable sink tables also a telescope stench trap available

Corner tables and corner roundings
Cover plate
Elevated rear edge
Height adjustment (manual or electric)
Pouring basins
Shelves (perforated plate, grate or solid plate shelves)
Sinks (in height-adjustable table max depth 200mm)
Washbasin cabinets
Waste bins

Water and drain connections
Electrical outlet in height-adjustable table

Adjustable legs
Wall mounting, adjustable front legs (ensures the easy cleaning between the table and wall)

Standards and directives in electric height-adjustable table structures taken into account
EN 60204-1 Safety of machinery
ISO 12100:2010 Safety of machinery
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
Machinery Directive 2006/42/EU

Kavika HealthCare Oy, Mursketie 6, 15860 Hollola
contact@kavikahealthcare.fi, www.kavikahealthcare.fi

For the designer

Our stainless steel tables are always custom-made. This means that the accessories our tables are fitted with can be freely chosen to suit the intended use. The frame is made of 30×30 mm stainless steel pipe, and the leg pipes are equipped with adjustment pads to facilitate the levelling of the table. The tabletops are equipped with a standard washstand or straight (‘AT’) edging. The tabletops are also available with raised rear edges of different heights. A moisture-resistant chipboard or a GST board will be glued as a support plate under the tabletop.

The space surrounding the sink should also be considered when the sinks are chosen. If the table is to be equipped with a mixer, enough room must be left for it; for example, a 600-mm wide table can accommodate a 400-mm sink in the depth direction of the tabletop.

By special order, we will also prepare openings for a hob unit or waste hole; column notching can also be provided upon request. The rear edge will be raised according to the intended use as specified in the order. A cover plate can be provided in front of the sink, and the corners of the table can be rounded where requested.

The frame units are also available custom-made in special dimensions. The cabinet and the drawer can also be equipped with a drawer lock where requested. Please contact our salespersons for further information on designing special equipment and fixtures.

For the buyer

Before placing your order, it is advisable to check the dimensions of the equipment or fixture (length x width x height), as well as the number and size of sinks and their location on the tabletop. The shelves, cabinets and drawers to be fitted into the frame should also be checked before the order is placed.

The hole for the mixer will be made at the factory as requested.

Maintenance and use

Stainless steel equipment and fixtures must be cleaned on a regular basis to prevent them from rusting. A water wash is often sufficient for cleaning a stainless steel surface; hot water and steam can be used in special cases.

Impurities and deposits that have adhered to the surface can be removed by rubbing them with an emery cloth, for example. NOTE! The emery cloth must be non-ferrous. It is advisable to first try the treatment on a less noticeable part of the product.

Standard cleaning powders or power detergents such as soda, borax or sodium perborate can be used for cleaning stainless steel surfaces.

Alkaline solutions, such as soda, ammonia and diluted soda lye, can be used for dissolving grease. Acetone, petrol, alcohol and similar organic solvents can also be used for removing grease deposits or other water-insoluble matter.

Detergents that contain sulphuric or hydrochloric acid may not be used for cleaning stainless steel surfaces.

The sterilising agents used for disinfection often contain sodium hypochlorite or potassium hypochlorite. However, these substances are dangerous to stainless steel as they easily give rise to pitting corrosion. Other disinfectants that contain chlorine, such as chloramines, are also dangerous. The most affordable disinfectant that is suitable for stainless steel is nitric acid; even mild concentration solutions have a bactericidal effect.

Treatment after cleaning
The detergent must be carefully cleaned from the steel surface. Rinsing with plenty of water is usually sufficient for this purpose. If acidic detergents are used, a pre-rinse should be carried out with a neutralising solution, such as soda.

The user must always ensure that the room concerned is sufficiently ventilated, proper protective gear is used and any in-house occupational heath and safety instructions are complied with.

Scroll to Top