Wall cupboards


Our stainless steel wall cupboards provide plenty of hygienic storage space.

Our range of cupboard designs can be used for putting together a set of cupboards that best suits the intended use.

By separate order, cupboards will also be manufactured with lockable doors or with a slanted roof.

As part of a standard delivery, the cupboard will be fitted with two incrementally adjustable solid or perforated plate shelves. Where necessary, our cupboards can also be delivered with stainless steel wire shelves for drying dishes, etc.

Product data sheet

Technical information

5080 Wall cupboard

Stainless steel AISI 304 (standard)
Also available acid-proof steel AISI 316

Standard widths
400, 500, 600 mm (1-door)
800, 1000, 1200 mm (2-door)

Standard depth
350 mm

Standard length
700 mm

Shelf alternatives
Solid plate shelf, perforated plate shelf

Quantity of shelves in standard delivery
2 pcs

Height adjustment
50 mm increments

Wall mount

Kavika HealthCare Oy, Mursketie 6, 15860 Hollola
contact@kavikahealthcare.fi, www.kavikahealthcare.fi

For the designer

The cabinets are made in 1 and 2-door configurations with standard dimensioning. The doors of the cabinets have a two-layer structure that makes them robust and durable. For hospital use, we also manufacture wall cupboards fitted with glass doors.

Please contact our salespeople for more information.

For the buyer

It is advisable to check the dimensions of the cabinet (length x width x height) and the type and number of shelf plates or other necessary fixtures and accessories, if any, when placing the order. For cabinets with one door, the handedness of the door should also be checked.

Maintenance and use

Stainless steel equipment and fixtures must be cleaned on a regular basis to prevent them from rusting. A water wash is often sufficient for cleaning a stainless steel surface; hot water and steam can be used in special cases.

Impurities and deposits that have adhered to the surface can be removed by rubbing them with an emery cloth, for example. NOTE! The emery cloth must be non-ferrous. It is advisable to first try the treatment on a less noticeable part of the product.

Standard cleaning powders or power detergents such as soda, borax or sodium perborate can be used for cleaning stainless steel surfaces.

Alkaline solutions, such as soda, ammonia and diluted soda lye, can be used for dissolving grease. Acetone, petrol, alcohol and similar organic solvents can also be used for removing grease deposits or other water-insoluble matter.

Detergents that contain sulphuric or hydrochloric acid may not be used for cleaning stainless steel surfaces.

The sterilising agents used for disinfection often contain sodium hypochlorite or potassium hypochlorite. However, these substances are dangerous to stainless steel as they easily give rise to pitting corrosion. Other disinfectants that contain chlorine, such as chloramines, are also dangerous. The most affordable disinfectant that is suitable for stainless steel is nitric acid; even mild concentration solutions have a bactericidal effect.

Treatment after cleaning
The detergent must be carefully cleaned from the steel surface. Rinsing with plenty of water is usually sufficient for this purpose. If acidic detergents are used, a pre-rinse should be carried out with a neutralising solution, such as soda.

The user must always ensure that the room concerned is sufficiently ventilated, proper protective gear is used and any in-house occupational heath and safety instructions are complied with.

Scroll to Top